Windows Home Server 2011 Awieco WakeOnLan Add-In – Video Edition

Capture

Awieco has just announced the Release Candidate of their Windows Home Server 2011 Awieco WakeOnLan Add-In. This powerful Add-In allows you to use the Wake On Lan ability of your network card to start your computers remotely. Check out our short video on the installation and the usage case for the Awieco WakeOnLan Add-In.

Awieco WakeOnLan Add-In

Awieco WakeOnLan

Directly from the Awieco website:

The AWIECO WakeOnLAN add-in for Windows Home Server 2011 and Small Business Server 2011 Essentials is a free and useful add-in, which has the ability to remotely turn on a computer. It enables the Server to start up every computer attached to your network. You can also power off a computer out of the Launchpad. The gadget on the WHS or SBS web-interface shows a list of all available and connected computers within your network and provides the possibility to start them up from any location inside your network or via internet, by just one mouse click. You can add further computers to your network manually by entering the MAC address or even delete them. The add-in automatically recognises if a computer is already turned on or if it is booting up.

The previous Vail review can be found at: http://connecteddigitalworld.com/2010/06/28/vail-add-in-review-awieco-wakeonlan-video-edition/

Installation Video

Awieco WakeOnLan Add-In

Tim

Windows Home Server Release Candidate

You can download Windows Home Server 2011 at:

Download WHS 2011

Windows Home Server 2011

The installation of Windows Home Server 2011 has only a few basic requirements.

Windows Home Server 2011 is a 64-bit only operating system.

You can install the server software either manually or unattended.

System Requirements

  • 1.4 GHz x64 processor
  • 2 GB RAM
  • At least one 160 GB (or larger) hard drive
  • NTFS is the only supported file system

Supported networking configuration:

  1. Your server computer must be connected to a router via a network cable
  2. Windows Home Server works best with a UPnP certified device, but it is not required
  3. The router works best in the 192.168.x.x subnet, but it is not required

Try Windows Home Server 2011 and download from Connect today!